spiral classifier

This classfiers suitable for drainage, medium, drain aging amd syringes in ore clressing for medium and fine naterial wet and Trockenklassifizierungsin me.

Such Gold Mining Machine is mainly used in the production process of metal processing. According to the difference in sedimentation of mineral particles and sludge, the particle sizes of ores with 14-325 mesh are classified. Waste sludge or water for ore sand can be separated from the ores.

Such machines are divided into individual Spiralsichterund double Spiral classifier. In addition, they are also divided into high weir spiral classifier and underwater spiral classifiers. If the overflow edge is higher than the center line of the spiral shaft and smaller than the outer diameter of the spiral at the Überlaufendeist, the spiral classifiers those high weir. If the overflow edge is higher than the center line of the spiral shaft and greater than the outer diameter of the spiral at the overflow end of the spiral classifiers are immersed ones. High weir classifiers are usually used for the classification with a particle size of less than 100 mesh. Submerged classifiers are typically used for classification with particle size less than 200 mesh.

Model	Spiral Dia.	Spiral Speed	Output		Motor Power		Weight
			Circulating Load	Overflow Quantity	Lift Lower	Drive
	mm	r/min	t/24h	t/24h	kw	kw	t
High-weir single spiral classifier
FG-3	Φ300	8.3-2.2	30-80	10-30	2.2	1.1	0.67
FG-5	Φ500	8.5-15.5	143-261	32	2.2	1.1	1.6
FG-7	Φ750	4.5-9.9	256-564	65	2.2	3	2.83
FG-10	Φ1000	3.5-7.6	473-1026	85	2.2	5.5	4
FG-12	Φ1200	5、6、7	1170-1600	155	2.2	5.5	8.54
FG-15	Φ1500	2.5、4、6	1140-2740	235	2.2	7.5	11.68
FG-20	Φ2000	3.6、5.5	3890-5940	400	3	11、15	20.45
FG-24	Φ2400	3.64	6800	580	3	15	25.65
FG-30	Φ3000	3.2	11650	893	4	22	40.9
High-weir double spirals classifier
2FG-12	Φ1200	5、6、7	2340-3200	310	2.2×2	5.5×2	15.84
2FG-15	Φ1500	2.5、4、6	2280-5480	470	2.2×2	7.5×2	21.11
2FG-20	Φ2000	3.6、5.45	7780-11880	800	3×2	22、30	36.34
2FG-24	Φ2400	3.67	13600	1160	3×2	30	53.49
2FG-30	Φ3000	3.2	23300	1785	4×2	40	73.03
Submerged single spiral classifier
FC-12	Φ1200	2.5、4、6	1170-1630	120	2.2	7.5	11.1
FC-15	Φ1500	2.5、4、6	1140-2740	185	2.2	7.5	15.32
FC-20	Φ2000	3.6、5.5	3890-5940	320	3	11、15	29.056
FC-24	Φ2400	3.64	6800	455	4	18.5	37.267
FC-30	Φ3000	3.2	11650	705	4	22	46.2
Submerged double spiral classifier
2FC-12	Φ1200	3.8、6	1770-2800	240	2.2×2	7.5×2	19.61
2FC-15	Φ1500	2.5、4、6	2280-5480	370	2.2×2	7.5×2	27.45
2FC-20	Φ2000	3.6、5.5	7780-11880	640	3×2	22;30	50
2FC-24	Φ2400	3.67	13700	910	3×2	30	53.491
2FC-24	Φ2400	3.67	13700	910	4×2	37	65.283
2FC-30	Φ3000	3.2	23300	1410	4×2	45	84.87