Product
description :
Metal mining is
widely used in mining Hydrocyclone technology of
choice in a variety of metal ore . It is mainly manifested in the following: 1.
Classification Section closed mill
2 . For the
second quarter closed-circuit grinding and classification
3 . For heavy
grinding fineness classification
4 . Select the
mud before and after the removal of choice
5. Dam and
backfill gangue .
In the
closed-circuit grinding system , it has a high classification efficiency and
fine fineness overflow at high concentrations mine . Grading 5-10 % higher
efficiency than ordinary spiral classifier . It is beneficial for improving the
utilization factor grader .
According
grinding capacity , fineness and sedimentation overflow concentrated cyclone
select the appropriate norms and patterns. This is to obtain the optimum
operating state of the premise. Tongge able to provide independent , parallel
connection machine or machine series in such specifications for Φ50, Φ75, Φ100,
Φ125, Φ150, Φ200, Φ250, Φ300, Φ350, Φ500 and Φ660.Fine sand, less than 37μm, in
the choice of mine Gold Mining Plant gangue material can not be used as a weir . After the cyclone
classification, coarse particles left in the bottom of the dam , the fine
particles to move to the gangue tail. During exercise fine-grained hierarchical
nature. Some full of clean water, which can be used to call back the water .
Full tail filling process, we use a cyclone separator concentrate grade coarse
particles , so to reduce the load on filter , to achieve the best results. Use
cyclone to complete the dam grouting work in order to solve problems such as
leaking mine , sink and discharge excessive water. Therefore, to achieve
significant economic and social benefits .
No comments:
Post a Comment