IS Centrifugal Pump, Water Pump, IS pump, pumps Technical Parameter

IS Centrifugal Pump, Water Pump, IS pump, pumps Technical Parameter:

1. Caliber: DN50-DN200mm

2. Capacity: 3.5-460m3/hr

3. Head: 4-132m

4. Rotate speed: 2900 r/min; 1450 r/min

5. Work temperature: ≤150°C

6. Viscosity: ≤150mm2/s

7. Pressure: ≤1.6Mpa

8. Motor power: 0.55-110Kw

If you need more detail and specification, please feel free to contact us.

-  www.shaking-table.com

Type	Flow	Lift head	Rotation speed	Motor power	Diameter(mm)	Diameter(mm)
	(m3/h)	(m)	(r/min)	(kw)	Suction	Outlet
IS50-32-125	12.5	20	2900	2.2	50	32
	6.3	5	1450	0.55	50	32
IS50-32-160	12.5	32	2900	3	50	32
	6.3	8	1450	0.55	50	32
IS50-32-200	12.5	50	2900	5.5	50	32
	6.3	12.5	1450	0.75	50	32
IS50-32-250	12.5	80	2900	11	50	32
	6.3	20	1450	1.5	50	32
IS65-50-125	25	20	2900	3	65	50
	12.5	5	1450	0.55	65	50
IS65-50-160	25	32	2900	5.5	65	50
	12.5	8	1450	0.75	65	50
IS65-40-200	25	50	2900	7.5	65	40
	12.5	12.5	1450	1.1	65	40
IS65-40-250	25	80	2900	15	65	40
	12.5	20	1450	2.2	65	40
IS65-40-315	25	125	2900	30	65	40
	12.5	32	1450	4	65	40
IS80-65-125	50	20	2900	5.5	80	65
	25	5	1450	0.75	80	65
IS80-65-160	50	32	2900	7.5	80	65
	25	8	1450	1.5	80	65
IS80-50-200	50	50	2900	15	80	50
	25	12.5	1450	2.2	80	50
IS80-50-250	50	80	2900	22	80	50
	25	20	1450	3	80	50
IS80-50-315	50	125	2900	37	80	50
	25	32	1450	5.5	80	50
IS100-80-125	100	20	2900	11	100	80
	50	5	1450	1.5	100	80
IS100-80-160	100	32	2900	15	100	80
	50	8	1450	2.2	100	80
IS100-65-200	100	50	2900	22	100	65
	50	12.5	1450	4	100	65
IS100-65-250	100	80	2900	37	100	65
	50	20	1450	5.5	100	65
IS100-65-315	100	125	2900	75	100	65
	50	32	1450	11	100	65
IS125-100-200	200	50	2900	45	125	100
	100	12.5	1450	7.5	125	100
IS125-100-250	200	80	2900	75	125	100
	100	20	1450	11	125	100
IS125-100-315	200	125	2900	110	125	100
	100	32	1450	15	125	100
IS125-100-400	100	50	1450	30	125	100
IS150-125-250	200	20	1450	18.5	150	125
IS150-125-315	200	32	1450	30	150	125
IS150-125-400	200	50	1450	45	150	125
IS200-150-250	400	20	1450	37	200	150
IS200-150-315	400	32	1450	55	200	150
IS200-150-400	400	50	1450	90	200	150

ZWD-8 high-power UV lamp strengths and parameters

Performance and Features

ZWD -8 High-power UV lamp is hand- type UV lamps, with power, the irradiation area with properties such as geological exploration and mineral needs of the current study by a good performance of the UV light can be charged. It is mainly used to refer to scheelite, zirconium, diamond, autunite, and other minerals with a fluorescent reaction. The products are used in Gold Mining Machine geological exploration, should ZWD -8 high-power UV lamp are widely used in biochemistry, achieved reagents, public safety, environmental protection department, in a variety of fluorescence analysis, determination and satisfactory results.

Specifications:

Radiation wavelength: 2537 Egypt

The fluorescence intensity: scheelite sample of 1.5 m were able to stimulate fluorescence intensity in the middle of the ore samples ( dark measurement )

Operating voltage: 6 V DC

Ambient temperature: 0 ~ 45 ℃

Linear vibrating feeder in Jiangxi Shicheng Mine Machinery Factory

This Linear vibrating feeder is characterized by stable vibration, reliable operation, long life, etc. It is capable of feeding crusher in a continuous and even way and roughly seven materials. Such linear vibratory conveyors are widely used in crushing and screening equipment in mineral processing, building materials used, silicate and chemical industry.

Model	Feed size	Capa.	Speed	Power	Material slot size	Overrall dimensions	Weight
	mm	t/h	r/mm	kw	mm	mm	t
ZSW380×95Ⅱ	500	96-160	500-714	11	3800×960	3882×2177 ×2066	4.1
ZSW420×110	580	120-240	500-800	15	4200×1100	4282×2400 ×2150	4.7
ZSW490×96	500	120-240	500-800	15	4900×960	4957×2277 ×2150	5.4
ZSW490×110Ⅱ	630	120-280	500-800	15	4900×1100	4950×2425 ×2031	5.4
ZSW590×110	630	350	750	22	5900×1100	6000×2500 ×2150	6.1
ZSW590×130	630	400	750	22	5900×1300	6000×2700 ×2150	6.3
ZSW600×130	750	400-560	500-800	22	6000×1300	6082×2580 ×2083	7.8

YA Circular vibrating screen and YK Circular vibrating screen

1. Use

YA Circular vibrating screen is mainly applied in coal, Gold Mining Machine, power generation, to classify building materials, water, light and chemical industries and other industries and a highly efficient screening machine for coal, ore, coke and other bulk materials.

2. Working philosophy and Structural Property

The screen is powered by an electric motor with eccentric mass about Delta belt drive, so that screen box to vibrate vibrator, circular with the path of movement of the screen field.

The Circular vibrating screen is a screen box, vibrator, damping spring device support and other sub-frame is as shown in Figure. The screen box uses the expanded ring groove rivet connection to and is of frame structure.

The vibrator takes eccentric shaft and eccentric block and the spring damping device with steel spiral spring.

Standard  Model	Layer	Max Particle size(mm)	Sieve  size(mm)	(mm)	Productive  capacity(t/h)	Frequency(shift/mm)	(°) Angle	Cooperate  Motor		DimensionL*W*H	Weight(kg)
								Model	(W) Power
SZZ600×1200	1	40	1-25	6	10-20	1000	15-25	Y112L1-4	2.2	1370×890×330	340
SZZ2600×1200	2	40	1-25	6	10-20	1000	15-25	Y112L1-4	2.2	1370×890×430	360
SZZ900×1800	1	40	1-25	6	20-25	1000	15-25	Y112L1-4	2.2	2150×1358×575	550
SZZ2900×1800	2	40	1-25	6	20-30	1000	15-25	Y112L2-4	3	2489×1358×770	620
SZZ1250×2500	1	100	5-40	2-7	150	850	15-20	Y1321S1-4	5.5	2762×1714×680	1100
SZZ21250×2500	2	150	5-40	2-7	150	850	15-20	Y1321S1-4	5.5	2702×1714×740	1300
SZZ1500×3000	1	100	1-40	8	220	800	15-25	Y132M1-4	7.5	3320×1449×787	2100

Gold pan for gold panning a traditional tool

Description

The Gold panning pan is a traditional gold panning tool that has been widely used in alluvial gold mining and gold exploration. As it is easy to carry, easy to use, it is an important tool for Gold Mining Plant. And also, has this pan for other alluvial mineral mining such as columbite / coltan, tin, diamonds and etc.

Types and models

We get the traditional gold pan, which is made by wood, and there are three models of this wood ladle: small, middium and size. We design and manufacutred murder plastic gold pan, which one is lighter, stronger, more efficient than the wood.

Mini mobile gold washing machine description and Optional Parts

description

This Mini mobile gold washing machine is manufactured according to customer's requirement, The machine consists of hopper, washing drum, drum screen, chain driven system and exhaust funnel.

Optional Parts

1.Tyres

2.diesel engine / gas engine driven system.

3.sluice field

4.water spray

5.water pump

Available models:

JXSC-400, JXSC-500, JXSC-600, JXSC-750th or we can Gold Mine Equipment under your own design.

Amalgamation machine for gold refining

description

Amalgamation machine is the traditional gold refining machine, it is widely used to mix the mercury and gold concentrate,

In order to receive the pure gold.

Our automatic amalgamator will drive new designed, engine, machine, instead of mannual to more efficient;

use to facilitate the stepper motor operation, use stainless iron tank to get a long life and save the mercury;

reasonable structure make this machine neat and clean.

application

This machine is used for mixing mercury and gold concentrate to extract the pure fine gold.

Fluctuate sluice box / pulsating sluice box / vibrating sluice box

description

The sluice box vacillation is also used as a wash trough pulsating, vibrating sluice box, this machine is a new type of sluice box, which is by a Chinese engineer inovated, and it is widely used in the gold concentration to replace the traditional sluice box.

application

These fluctuating lock machine is used to focus in Gold Mining Equipment, especially the alluvial gold

Recovery and recycling taillings. And this machine could work very well with centrifugal gold concentrator.

Advantage and disadvantage

Compare with the traditional sluice box, these Fluctuating sluice box get the advantages as bellow:

First with higher recovery rate.

Second with higher concentating ratio, there are fewer gait inside the concentrate.

3rd with higher efficiency

4th efficient for the sheet shape gold concentrate.

5th prevent the sedimentation of the slurry.

The disadvantages of this machine compare with the traditional sluice box this machine is power from supply, and the feeding size should be limited below 7 mm.

Spiral Classifier Structure Description

First General Description

This kind of machine is the transmission mechanism ( left, right) spiral water tank, hoist, lower support, lubricator, ore dump valve, feed intake, etc. ( See the attached overview drawing for details) composed.

The water tank of the Gold Mining Equipment installed at an angle. The tilt angle is determined by the system configuration of devices in the process flow. The ( left, right) spirals driven by the transmission mechanism rotates in the water tank. The fine-grained mud in the water from the development bank inlet on one side and forms a sludge precipitation zone, the surface and volume depends on the value of the inclination angle of the water tank and the height of the overflow edge. The spirals with a low rotating speed play a certain role stirring. After stirring the porridge float light and fine particles on the surface and overflow from the overflow edge. Then they flow into the next operation of the mineral processing. The thick, heavy particles sink to the bottom of the water tank and rear sand which is transported from the spirals on the ore discharge for discharge mouth.

If ore grinding and classification are closed-loop operation, the discharge mouth of the ore discharge sand goes back to the mill for further grinding. Classifiers usually form a closed circuit together with a mill.

function diagram

First Transmission mechanism second Left Spiral, 3rd Right spiral 4th Lower support

5th Lifting device 6. water tank

4th Structure Description of main parts

(1 ) Transmission mechanism : Ф3000, Ф2400 andФ2000 classifiers consist of a motor, clutch, speed controller clutch cylinder and bevel gear whileФ1500 andФ1200 classifiers consist of a motor, belts, reduction gear and the spur gear pair. The transmission mechanism drives the rotation of the spiral.

(2 ) ( left, right) Spirals Spirals consist of hollow shaft spiral blade holder, iron liners, etc. The upper ends are in the cross shaft sleeve worn, while the lower ends of which are supported in the lower support. Hollow shafts with diameters over 500 mm with two semi-circular cross- welded steel plate, so that wave breaking can be due to poor weld quality by Querschweißvermieden. For hollow shafts with small diameters (eg 325mm ) seamless steel pipes are used. If the spirals rotate the spiral blades stir the broth slightly. The emitted light and fine particles from the overflow weir, while the thick, heavy particles promoted the ore discharge support for relief. Anti- wear life of the lining of iron is very important. It needs further study.

(3 ) Low - Support: How long works the lower support is immersed in the mud, his poetry is very important. The sealing of the lower support directly on the bearing life. In design, it is the multi-layer cotton -clack valve - type packaging and high-pressure Fettdoppeldichtungsstrukturund is equipped with hand pumps dry on the lubricator. It can fill grease into the interior of the bearing on a regular basis in order to maintain its sealing properties.

(4) Water tank: water tank is welded by steel rods and all kinds of profile steel. Due to the difficulties in transportation, water tanks ofФ3000, Ф2400 andФ2000 classifiers are combined in the rule and welded in the workplace. The water tank will have to bear the weight of the machine itself and any load. Therefore, the design of the foundation that the water tank is very important (the structure should be reasonable and the Foundation are hard). To avoid the water tank is deformed by improper support and thus affect the operation of the machine is the diagram of the foundation structure for this machine that can serve as a benchmark for foundation design is appropriate.

( 5) lubricating device : In order to improve the lubrication conditions of machines and better lubrication and sealing property of the lower bearings, lubrication methods of manual lubrication centralization is assumed forФ3000, Ф2400 andФ2000 classifiers. It is equipped with dry hand pumps and valve work and on the insides of all the camps to infuse fat on a regular basis. Some users may decide according to certain operating conditions when the Schmiersteuerkonsolean the left wall and the right wall installed. Or it can be used elsewhere. The lubrication method of manual lubrication forФ1200 andФ1500 classifier adopted.

(6 ) Drain valve : drain valve at the bottom of the water tank installed so that manure be drained from the water tank if necessary. During normal operation of the valve can be shut off.

(7 ) Lifting device : The lifting device consists of an engine -, wheel reducer, bevel gear, threaded nuts, and other parts. If the classifier works more lifting device with a target for the prevention of the solid in the slurry by precipitation and pressing the coils, so that damage to machine parts and is installed in order to facilitate repair. If the classifier works more spirals must be lifted out of the water tank in order to get the most of the spirals of the slurry. For the safety of the lifting process end of stroke switch is installed so that the lifting movement can be controlled automatically. See Figure 2 for wiring diagram.

Further electrical schematic diagrams designed to Spiral classifier rotation and lifting control linkage (FIG. 6). If the classifier does more, with the commissioning of the lifting device, the spirals can be automatically raised to a certain height. If the classifier works, the spirals may automatically to the working position during the rotation of the lifting device to hold the hollow front broken by overload are lowered. Whether to assemble electrical control device shall be determined by the user according to the actual conditions. The manufacturer does not provide parts and components required by this electric installation.

Figure 2: Schematic representation of the electric lifting Journey control of the lifting device

RD - fuse TA - Stop light

SC - Contactor for lifting SXK - Lifting tours

JC - Contactor for lowering JXL - Lowering tours

JA - Lowering Home

spiral classifier

This classfiers suitable for drainage, medium, drain aging amd syringes in ore clressing for medium and fine naterial wet and Trockenklassifizierungsin me.

Such Gold Mining Machine is mainly used in the production process of metal processing. According to the difference in sedimentation of mineral particles and sludge, the particle sizes of ores with 14-325 mesh are classified. Waste sludge or water for ore sand can be separated from the ores.

Such machines are divided into individual Spiralsichterund double Spiral classifier. In addition, they are also divided into high weir spiral classifier and underwater spiral classifiers. If the overflow edge is higher than the center line of the spiral shaft and smaller than the outer diameter of the spiral at the Überlaufendeist, the spiral classifiers those high weir. If the overflow edge is higher than the center line of the spiral shaft and greater than the outer diameter of the spiral at the overflow end of the spiral classifiers are immersed ones. High weir classifiers are usually used for the classification with a particle size of less than 100 mesh. Submerged classifiers are typically used for classification with particle size less than 200 mesh.

Model	Spiral Dia.	Spiral Speed	Output		Motor Power		Weight
			Circulating Load	Overflow Quantity	Lift Lower	Drive
	mm	r/min	t/24h	t/24h	kw	kw	t
High-weir single spiral classifier
FG-3	Φ300	8.3-2.2	30-80	10-30	2.2	1.1	0.67
FG-5	Φ500	8.5-15.5	143-261	32	2.2	1.1	1.6
FG-7	Φ750	4.5-9.9	256-564	65	2.2	3	2.83
FG-10	Φ1000	3.5-7.6	473-1026	85	2.2	5.5	4
FG-12	Φ1200	5、6、7	1170-1600	155	2.2	5.5	8.54
FG-15	Φ1500	2.5、4、6	1140-2740	235	2.2	7.5	11.68
FG-20	Φ2000	3.6、5.5	3890-5940	400	3	11、15	20.45
FG-24	Φ2400	3.64	6800	580	3	15	25.65
FG-30	Φ3000	3.2	11650	893	4	22	40.9
High-weir double spirals classifier
2FG-12	Φ1200	5、6、7	2340-3200	310	2.2×2	5.5×2	15.84
2FG-15	Φ1500	2.5、4、6	2280-5480	470	2.2×2	7.5×2	21.11
2FG-20	Φ2000	3.6、5.45	7780-11880	800	3×2	22、30	36.34
2FG-24	Φ2400	3.67	13600	1160	3×2	30	53.49
2FG-30	Φ3000	3.2	23300	1785	4×2	40	73.03
Submerged single spiral classifier
FC-12	Φ1200	2.5、4、6	1170-1630	120	2.2	7.5	11.1
FC-15	Φ1500	2.5、4、6	1140-2740	185	2.2	7.5	15.32
FC-20	Φ2000	3.6、5.5	3890-5940	320	3	11、15	29.056
FC-24	Φ2400	3.64	6800	455	4	18.5	37.267
FC-30	Φ3000	3.2	11650	705	4	22	46.2
Submerged double spiral classifier
2FC-12	Φ1200	3.8、6	1770-2800	240	2.2×2	7.5×2	19.61
2FC-15	Φ1500	2.5、4、6	2280-5480	370	2.2×2	7.5×2	27.45
2FC-20	Φ2000	3.6、5.5	7780-11880	640	3×2	22;30	50
2FC-24	Φ2400	3.67	13700	910	3×2	30	53.491
2FC-24	Φ2400	3.67	13700	910	4×2	37	65.283
2FC-30	Φ3000	3.2	23300	1410	4×2	45	84.87

Jiangxi Shicheng Mine Machinery Factory Hydrocyclone

Product description :

Metal mining is widely used in mining Hydrocyclone technology of choice in a variety of metal ore . It is mainly manifested in the following: 1. Classification Section closed mill

2 . For the second quarter closed-circuit grinding and classification

3 . For heavy grinding fineness classification

4 . Select the mud before and after the removal of choice

5. Dam and backfill gangue .

In the closed-circuit grinding system , it has a high classification efficiency and fine fineness overflow at high concentrations mine . Grading 5-10 % higher efficiency than ordinary spiral classifier . It is beneficial for improving the utilization factor grader .

According grinding capacity , fineness and sedimentation overflow concentrated cyclone select the appropriate norms and patterns. This is to obtain the optimum operating state of the premise. Tongge able to provide independent , parallel connection machine or machine series in such specifications for Φ50, Φ75, Φ100, Φ125, Φ150, Φ200, Φ250, Φ300, Φ350, Φ500 and Φ660.Fine sand, less than 37μm, in the choice of mine Gold Mining Plant gangue material can not be used as a weir . After the cyclone classification, coarse particles left in the bottom of the dam , the fine particles to move to the gangue tail. During exercise fine-grained hierarchical nature. Some full of clean water, which can be used to call back the water . Full tail filling process, we use a cyclone separator concentrate grade coarse particles , so to reduce the load on filter , to achieve the best results. Use cyclone to complete the dam grouting work in order to solve problems such as leaking mine , sink and discharge excessive water. Therefore, to achieve significant economic and social benefits .

Gold Centrifugal Concentrator

Description:

Gold Centrifugal Concentrator is a new type of gravity concerntration equipment for concerntrating gold and other high desity minerals. The contrifuga machine get many advantages compared with other competitive concerntration machines to create high returns for investors.

advantages:

High recovery rate: about our test , the recovery rate for placer gold mine over 90 % and for the rock gold mine when the feed size less than 0.04 mm, the recovery rate to reach 95%.

High efficiency : STLB30 model with a capacity of 3.2 tons / hour. Only a small Gold Mine Equipment could such a high capacity and high recovery rate , it is the most efficient concentration machine to achieve in our factory.

Easy to install : just a small flattened space is required , is the low height , the weight is light . And it's a complete machine before starting the machine, connected only water and electricity.

Easy to adjust : there are only two factors that influence recovery result , water pressure and supply size. By varying water pressure ( between 0.06 to 0.1 ) and feeding size, you can get the best recovery effect .

Easy to use: when the water pressure and feeding set size what you need to do is pick the concentrated material every 2 to 4 hours (depending on the class of mine) .

No pollution : only consume this machine , water and power and exhaust tailings and water , low noise, involved no chemical agents.

Reliable: this machine get a simple and hard structure , the main body through thick steel , and the concentrate cone is made of stainless steel. And the bearings greased , it's running well .

application:

The centrifuge is very efficient in the processing of precious minerals such as gold, niobite , tantalite , lead -zinc , tin, and etc. It can be used not only for alluvial concerntration mines, but also for recovering the hard rock mine . Due to the high recovery rate of this machine, it is also used to recover gold from the tailings .